When building a pipeline,the length of the pipes used are not always known. By manufacturing the pipe separate from the plate flange, the welders can cut the pipe to length and weld a flange plate in place to join the pipes at any needed length. The plate flange can also be welded to the pipe on a slight bias, allowing two pipes to be joined that may not be precisely lined up.

We produce carbon steel plate flanges,the designs are uniform in any given size regardless of materials used to create them. This allows a 6-inch (15 cm) black pipe flange to mate perfectly with a 6-inch stainless steel flange. The flange plates will have a serrated finish on the inside mating surface,which allows the flange to seat into the gasket material. This ensures a perfect seal between two joining pipes.

Plate flange with chamfers and bevels are used to assist in lining up two pipes which are out of alignment. Plates with a studding outlet are plates that have studs inserted around the plate in place of bolt holes.steel flange plate,this type of plate allows the pipes to be joined by sliding one flange plate over the studs on a second flange plate and then nuts are tightened to secure the two.

Steel flange plate make it possible to remove a section of pipe or to add onto a pipeline with ease. Without the flange plates, the pipes would require cutting and welding in order to be separated or added onto.This would be much more expensive and the pipe line would be out of service for a greater length of time.